Tutorials

What are 3D Printed Vases? 3D printed vases are decorative pots that are created using 3D printing technology. They are made by layering materials, such as plastic or ceramic, to form intricate and unique designs. These vases can be customized and produced in various shapes, sizes, and patterns. Uniqueness and Customization One of the key benefits of 3D printed vases is their uniqueness. Unlike mass-produced vases, 3D printed vases can be...

PINOUT One Time Bluetooth Setup  Step 1 – Connect to M3D Go Hotspot  Download M3D Go file from https://drive.google.com/file/d/1wzw_aq4p5YMMmBsKfGFIPqyeXN-0TSq-/view Turn on your M3D GO    Go to scratch.markhor3d.com Load the file and go to M3D GO icon on left bottom  Connect M3D with Bluetooth   Step 3 – Go!   Project Files (Scratch Templates): Click Here Now, hit the run flag, learn, code and go! Download the manual in PDF: Click Here

In case you can’t see the printer control panel in CURA, it is because Cura can’t communicate to your printer. This can be due to a lot of things, let’s go through the most obvious ones first. First, make sure that you have installed the CP210x drivers according to this post and restart your computer. https://www.facebook.com/…/permalink/856194115566926/ Try to reconnect the printer a couple of times and wait for 15-20 seconds on...

Cura is G-Code sandbox but it is quite useless in many scenarios because you won’t be able to see what the printer says in response. This is possible with Prontoface. So if you suspect that one or more of your sliders, feeder, or hot-end are not working, you might want to take individual control over each unit and control them individually. Prontoface (PrinerRun) lets you do it more easily. Get if from...